Saturday, August 9, 2008

Wilcox Crittenden sea cocks!!!!!!!!!!

I know that this will upset the purists amongst you (assuming anyone is reading this) but I am not a fan of Wilcox Crittenden sea cocks. These things are bullet proof and will last forever BUT they require annual maintenance and they live in the bilge. Now, I am happy to visit the bilge on occasion, but mostly to recover bottles of wine and rum stored there. Since child labor is outlawed and I am unlikely to get more supple and/or thinner with age, working in the bilge is a definite no-no. The plan is to replace them with Groco seacocks as per the attached link;

http://www.pbase.com/mainecruising/replacing_thruhulls



In the interim the existing 12 seacocks had to be freed.


Some had been in hiding for some time (possibly 30 years?)



A closer look.




Access to the after starboard two seacocks required an additional access hatch. This has been retrofitted on most Whitby's by now. This is my first attempt on TIH and may be enlarged later. The red thing on the left is a Fein Multitool, every boy should have one.





Now Wilcox Crittenden seacock maintenance is a simple 12 step process.

1. If the boat is in the water dive under the hull and ram wooden plugs into ALL of the holes in the boat.
2. Gain access to the bilge by lifting several deck boards, move wine/rum out of the way etc.
3. Lie flat on your stomach while placing all necessary tools close at hand.
4. Reach deep down into the bilge and try and move the handle of the seacock. It won't.
5. Reach behind you and grab the correct spanner. (do not ask your wife, she is busy).
6. Release the first nut then the second one.
7. With the mallet (which you have held in your teeth, until now) gently (haha) tap the end of the shaft to free barrel of the seacock. Now try and move it.
8. If that doesn't work, reach back for a pliers, remove the split pin from the shaft and remove the handle.
9. Apply a large Pipe Wrench to the end of the shaft and apply 200 lbs of pressure on the very end of it. This will involve sticking leg deep into bilge via a sharp edged fiberglass hole and jumping up and down.
10. When it finally moves (and it will), clean blood and skin off of wine/rum bottles and bandage leg. (Wife may help with this but do not expect any sympathy, after all the same thing happened last year).
11. Disassemble all parts, wash in kerosene, re grease and reassemble (do NOT drop any parts deep into the bilge).
12. Dive back in the water and remove the plugs that have now swollen in size, remembering that sharks are attracted by blood.

Repeat on the other 11 seacocks, annually!

5 comments:

builder said...

That is a great link on replacing seacocks. I just removed serviced our W/C seacocks on our 28 footer last fall. Definately a PITA but they were still pretty good condition after 25 years.

Anonymous said...

I'm frightened... My surveyor has mentioned (as if in passing) that some of my seacocks are frozen and need to be freed or replaced. I'm more inclined to free them and head them in the general direction of the dumpster ("Go find Willy, little seacocks! You're free!") and introduce ballcocks to my boat. Oh, and flanged thru-hulls. But I won't be able to start until next spring. Actually, that's a good thing; I can watch and see what you do (he said, grinning). Best of luck... and what about the Whitby sea chest under the galley? I thought a sea chest eliminates all but one or two thru-hulls...

Scott said...

I have the thru-bolted W/C seacocks on my 80 W42. I rebuilt all but one, the one under the aft stairs while the boat was hauled... I agree royal PITA. But, have you priced a new 2'' seacock? The PO had added grease nipples to all the seacocks and "HEAVILY" greased each year. Took me longer to remove the piles of grease than to rebuild each seacock. I used valve grinding compound to lap the two surfaces.

The Incredible Hull said...

Hi all

Sorry for late replies. The sea chest will replace some but not all valves. I will still have 9 left including 2 cockpit drains, 2 heads out, 2 heads in, 2 sink out and one to the sea chest.

Austin, yes I have seen the prices, that's why I work for West Marine.

Best of luck with all your projects.

Unknown said...

I'm looking for a 3/4" bronze cone Willcox Crittenden seacock, the type that can be rebuilt.